Description
Electric Re-Circulating Draft Beer Line Cleaning Pump — 20' to 300' Runs
Professional electric recirculating pump for draft beer line cleaning on runs from 20' to 300'. Recirculation creates turbulent flow through the beer line — 80× more effective than static soaking. All-stainless case with hard coat finish on pump components for chemical resistance. Cordless design with quick-disconnect hoses for easy transport between accounts.
Features
- Line runs: 20' to 300'
- Flow control: Red handle ball valve on front for flow adjustment
- Built-in 15-minute timer — matches Brewers Association recommended contact time
- Hoses: 6' length, 3/8" I.D., temperature-resistant (flexible in cold)
- Case: Stainless steel
- Pump coating: Hard coat, chemical corrosion resistant
- Max system pressure: 60 PSI automatic bypass — do not exceed 50 PSI in lines
Note: Power cord (5-15P 115V) is NOT included — purchase separately.
Important Operating Notes
- Always keep the inline strainer clean — clogged strainer causes pump chatter and voids warranty
- Do not run pump without inlet hose connected — voids warranty
- Do not allow pump to freeze — not covered under warranty
- Use GFCI-protected outlet — never operate with wet hands
- Water temperature above 140°F should be avoided
Always use brewery-approved beer line cleaning chemical. Minimum 15-minute recirculation cycle per Brewers Association standard.
Need a pump for runs over 300'? See the EBC300PLUS (826-EBC300PLUS, $1,462). Questions? Email info@wholesalebeerparts.com.
Pair with: Draftec Blue Dye Cleaner | Draftec Red Acid Cleaner
Product documents
You may also like
Order and get 930 reward points
Earn 100 points by signing up for our rewards program


