Pro-Line™ Power Pack MMPP4305-PKG - 7,250 BTU - 1 HP - 2 Pumps - Air Cooled

For long draw systems with a high cooling load — many beer lines, long trunk runs, or a power pack in a warm space — the Micro Matic Pro-Line™ Power Pack MMPP4305-PKG pairs a 7,250 BTU, 1 HP air-cooled compressor with two glycol pumps and an 11.5-gallon bath to keep beer at walk-in cooler temperature all the way to the faucet.

The current MMPP4305 specifications do not state a maximum run length. Estimate your cooling load with our BTU Load Calculator, or contact us with your tap count, run length and cooler location and we'll help you size the unit before ordering.

Why Bar and Brewery Pros Choose This Glycol Power Pack

Why bar and brewery pros choose this

• 7,250 BTU / 1 HP Air-Cooled Compressor — Built for long draw systems where heat load and distance demand serious cooling capacity.
• Two Rotary Vane Pumps — Provides two glycol circulation pumps for long-draw installations.
• 11.5-Gallon Glycol Bath — Expanded foam insulation is installed in the bath walls and floor.
• Digital Thermostat — Adjustable digital readout gives you an accurate glycol temperature at a glance — no guesswork.
• Sight Glass for Bath Level — Check glycol level instantly without removing the lid.
• Lift-Off Deck Lid — The removable upper deck provides access to components for service.

System compatibility

Designed for long draw glycol-cooled draft beer systems. Circulates a propylene glycol/distilled water mixture (40% glycol, 60% distilled water) alongside beer lines to maintain cooler temperature at the faucet. Compatible with standard long draw installations in bars, restaurants, and high-volume accounts. Note: units manufactured after 3/1/2023 use R513a refrigerant; units prior to 2/1/2022 shipped with a 6-15P plug.

Warranty: 18 months on parts and workmanship, 1 year labor, plus an additional 3.5-year compressor warranty from date of sale.

FAQ

What is this glycol power pack used for? It is used for long draw draft beer systems to help keep beer lines cold from the cooler to the faucet.

What size system is this best for? This 7,250 BTU, 1 HP air-cooled unit is designed for demanding remote or long draw beer systems.

What glycol mixture should be used? Use a propylene glycol and distilled water mixture at 40% glycol and 60% distilled water.