Orders ship and customer service available 9am-5pm Monday-Friday EST

Cleaning Chemicals Acid Line Cleaner AllKlear Dye Tablets Beer Line Cleaner - Powder Cleaners Growler Tablets Liquid Line Cleaners pH Test Strips Sanitizer Line Cleaning Pumps and Accessories Brushes Cleaning Adaptors and Components Cleaning Cans and Pumps Direct Draw Cleaning Kits Economy Cleaning Kits Flushers Wrenches and Tools

Clearance

Direct Draw & Refrigeration

Bar Commercial Refrigeration Back Bar Units Direct Draw Keg Units Kegerators and Conversion Kits

Draft Parts

Blenders, FOBs and Pumps Beer Pumps and Flooded Manifolds Foam on Beer Detectors Leak Detection & Testing Equipment McDantim Trumix Gas Blenders Couplers Beer Shut Offs, Elbows and “Y” Splitters Coupler Repair Parts and Lube Sankey Couplers Specialty Keg Couplers Faucets and Shanks Beer Faucets Faucet Guards Faucet Accessories Faucet Repair Parts Stainless Steel Faucets Standard Domestic Faucets Stout Faucets Beer Shanks Nipple Shanks 1/4” Nipple Nipple Shanks 3/16” Nipple Shank Parts Shotgun/Dual Shanks Standard Shanks 1/4” Bore Tower Shank Assemblies Home Brewing Kegs and Accessories Ball Lock Kegs Keg Disconnects and Replacement O-Rings Thermometers Hose, Clamps and Fittings Beer System Fittings Barbed Crosses Barbed Hose Stems Elbows for Beer Nuts Hex and Wing Beer Nuts Hose Nipples/Tailpieces Hose Splices Hose Stem and Nut Assembly John Guest Push in Fittings Male Flare To Male Flare Union Male Flare x Hose Barb Nipple MF x MPT Unions MPT x Hose Barb Nipple Nylon Flare Washers Rubber Beer Washers Stainless Steel Fittings Barbed Elbows Stainless Steel Fittings Barbed Tees Stainless Steel Fittings Hose Plugs and Caps Stainless Steel Fittings “U” Bends Stainless Steel Fittings “Y” Bends Swivel Nuts Wall Brackets, Beer “Y”s and Shutoffs Clamps and Crimpers Hose Cutters Tubing Barrier Tubing Braided Polyethylene Tubing Braided Vinyl Tubing Polyethylene Tubing Vinyl Beer and Air Tubing Keg Storage Long Draw Systems Air Shaft System Components Air Shaft Accessories Blower Assemblies Flexible Metal Tubing Tube Insulation for Flex Tubing Glycol Chillers and Components Aluminum Cooling Blocks Beer Trunkline Bundles Glycol Glycol Chillers Glycol Feed Line Replacement Parts Tube Insulation Tapes, Cable Ties and Accessories Nitro Dispense Wine Components Glycol Chillers Nitrogen Regulators & Air Bars Nitrogen Tanks Wine Couplers Wine Faucets Wine Ready Towers Wine Shanks Wine Trunk Lines Wine Tubing

Draft Towers & Drip Trays

Drip Trays and Accessories Angled and Cut-Out Drip Trays Drain Shank and Rinser Parts Stainless Steel Drip Trays Stainless Steel Drip Trays with Rinser Wall Mount Drip Trays Towers Brewery Pipe Style Towers Ceramic Towers European and Curved Towers Metropolis Towers Mushroom Towers Pass Thru Towers Single Column Towers and Add-a-Faucets 3” Column Towers 4” Column Towers Add-a-Faucet Tower Extentions Replacement Tower Parts Underbar and Wall Mount Dispensers

Gas Equipment

CO2 and Nitrogen Gas Tanks and Parts CO2 Gas Tanks Nitrogen Gas Tanks Specialty Wrenches and Adaptors Regulators & Gas Equipment Air Distributor Bars Air Line Disconnects Gauge Protectors Manual and Automatic Switchover Kits Nitrogen Regulators Primary Regulators Regulator Repair Kits Replacement Gauges and Parts Secondary Regulators Specialty Wrenches and Adaptors Secondary Regulator Wall Panels

Special Events

Hand Trucks and Parts B&P Hand Truck Parts (A) Handle (B) Frame (C) Nose (D) Wheels (E) Accessories (F) Completion Pack Build Your Own Custom Hand Truck Liberator Aluminum Convertible Hand Trucks (B&P Man) Valley Craft Aluminum Hand Trucks Picnic Pumps and Coolers Coil, Cold Plate and Jockey Boxes Aluminum Cold Plates Beer Line Jumper Hose w/ Fittings Clamp-On Towers Coil Box Coolers Cold Plate Coolers Cooler Couplings and Compression Fittings Stainless Steel Coils Keg Beer Party Pumps and Tubs Lever Tap Metal Pumps Party Keg Tubs Picnic Pump Replacement Parts Picnic Pumps

UBC Group

Name: 8 Tap Chrome Finished Terra Style "T" Glycol Tower With Decorative Flanges
Brand: UBC Group
SKU: 806-TR270-8
Price: 825.00 USD
Availability: InStock

Filters

Filter by Price

Variations

36000GS-Parts

(1) 43641-1 Ball Retaining Spring (1) (10) 23682 Check Valve (1) (12) 108 Body Seal (1) (13) FT-103 US Probe Seal (1) (2) 31080-2P Ball (1) (4) 31084-1 Handle Pin (1) (5) 31089-2P Body "O" Ring (3 required) (1) (7) 218 Hex Nut (1) (8) 216D 5/16" Air Nipple (1) (9) 24R Rubber Washer (1)

425 Series

(2) 1013021 Coupling Gasket (1) (3) 425-8 Lever and Spout "O" Ring (1) (4) 425-3SS Stainless Steel Spout (1) (5) 425-5 Bearing Cup (1) (6) 307-8-2P Bonnet Washer (1) (7) 408-15 Chrome Faucet Bonnet (1) (7) 408-15TF TF Brass Faucet Bonnet (1) 43773-1 Cleaning adapter (1)

525 Series

(1) 408A-16 Chrome Faucet Collar (1) (1) 408A-16TF TF Brass Faucet Collar (1) (2) 43835-2 Chrome Faucet Bonnet (1) (2) 43835-2TF TF Brass Faucet Bonnet (1) (3) 425-8 Lever "O" Ring (1) (4) 67030 Push Back Creamer Lever (1) (4) 68157-1 Stainless Steel Lever (1) (5) 67382-1 Bearing Cup (1) (6) 43838 Seat "O" Ring (1) (7) 1013021 Coupling Gasket (1)

630 Series

(1) 67829-1 Chrome Faucet Collar (1) (1) 67829-1TF TF Brass Faucet Collar (1) (2) 67820-1 Chrome Faucet Bonnet (1) (2) 67820-1TF TF Brass Faucet Bonnet (1) (3) 67828-1 Bonnet Washer (1) (4) 67819-2 Bearing Cup (1) (5) 68626A1 Stainless Steel Lever (1) (6) 67830-1 Lever "O" Ring (1) (7) 70141-1 Front Seat "O" Ring (1) (8) 1013021 Coupling Gasket (1)

Accessories

(E13) Aluminum Kick Bar for #E1L Stair Climbers (1) (E1L) Set of Two Extruded Aluminum Stair Climbers with 1/2" Wear Strips (includes mounting hardware) (1) (E45) 45" Frame Extension (1) (E52) 52" Frame Extension (1) (E55) 55" Frame Extension (1) (E60) 60" Frame Extension (1) (E68) 68" Frame Extension (1) (E9) Beer Keg Hook for Sankey Type 1/2 Barrels (includes mounting hardware) (1)

Amount

Case of 10 (1) Each (1)

Ball Lock Disconnect

1/4" Barb [Gas] (1) 1/4" Barb [Liquid] (1) 3/8" Barb [Gas] (1) 3/8" Barb [Liquid] (1)

Barb size

1/2 x 1/2 x 1/2 (1) 1/2" (1) 1/4 x 1/4 x 1/4 (1) 1/4 x 1/4 x 3/8 (1) 1/4 x 3/8 x 3/8 (1) 1/4" (1) 3/8 x 3/8 x 3/8 (1) 3/8" (1) 5/16 x 5/16 x 5/16 (1) 5/16" (1)

Barb sizes

1/2" X 1/2" (1) 1/4" X 1/4" (1) 1/4" X 3/8" (1) 3/8" X 1/2" (1) 3/8" X 3/8" (1) 5/16" X 5/16" (1)

Brush Size

Brush Set (all of above brushes including Spanner Wrench) (1) Keg Coupler Cleaning Brush (1) Nylon 1/2" Diameter x 66" Long (1) Nylon 1/2" Diameter x 8-1/2" Long (1) Nylon 1/4" Diameter x 66" Long (1) Nylon 1/8" Diameter x 4" Long (1) Nylon 3/16" Diameter x 66" Long (1) Nylon 3/4" Diameter x 8-3/4" Long (1) Nylon 3/8" Diameter x 6-5/16" Long (1) Nylon 3/8" Diameter x 66" Long (1) Nylon 9/32" Diameter x 6" Long (1) S/S 5/8" Diameter x 9" Long (1) White Nylon 3/4" Diameter x 8-3/4" Long (1)

CH5000 Parts

(1) Handle Assembly - GR-110 (1) (10) Check Valve - GR-107 (1) (11) Pressure Relief Valve Assembly - GR-PRV (1) (12) Body Seal - 108 (1) (2) Handle Pin - GR-109 (1) (3) Ball Stop - GR-99 (1) (4) Ball - 909B (1) (6) Probe "O" Ring (3 required) - FT-101 (1) (7a) US Probe Seal - FT-103 (1) (7b) Euro Probe Seal - FT-104 (1) (8) Hex Nut - 218 (1) (9) Air Nipple - GR-105 (1)

Carbonation Tester Options

2701-BCT-01 (1) 2701-BCT-02 (1)

Clamp Size

10.0 mm (1) 10.5 mm (1) 11.3 mm (1) 12.3 mm (1) 13.3 mm (1) 14.0 mm (1) 14.5 mm (1) 15.7 mm) (1) 16.2 mm (1) 17.0 mm (1) 18.5 mm (1) 19.8 mm (1) 21.0 mm (1) 22.6 mm (1) 24.1 mm (1) 9.5 mm (1)

Cold plate products/size

1 Product (10" x 15" Plate) (1) 1 Product (10" x 15" Plate) 304 Stainless Contact (1) 2 Product (10" x 15" Plate) (1) 2 Product (10" x 15" Plate) 304 Stainless Contact (1) 3 Product (10" x 15" Plate) 304 Stainless Contact (1) 4 Product (10" x 15" Plate) (1) 4 Product (10" x 15" Plate) 304 Stainless Contact (1)

Color

ANTIQUE GREEN (1) Antique Green (2) BLACK (1) BLACK (1) BLACK MARBLE (1) Beige Marble (2) Black (1) Black Marble (2) Blue (2) COBALT BLUE (1) Cobalt Blue (2) GREEN (1) Green (2) PEARL WHITE (1) Pearl White (2) RED (1) RED (1) WHITE (1) WHITE (1) WHITE MARBLE (1) White (2)

Cooling

AIR COOLED (1) AIR COOLED (2) Air Cooled (2) GLYCOL COOLED (1) GLYCOL COOLED (2) Make Glycol Ready (2)

Dimensions

10" x 15" Plate (1) 8" x 12" Plate (1) 8" x 14" Plate (1)

Drain

No drain hole (3) No drain hole (1) Standard drip tray (3) Standard drip tray (1)

Faucet Parts

10a - Chrome Shaft Assembly (1) 10b - Brass Shaft Assembly (1) 10c - Stainless Steel Shaft Assembly (1) 1a - Chrome Faucet Collar (1) 1b - PVD Gold Faucet Collar (1) 2a - Chrome Faucet Bonnet (1) 2b - Brass Faucet Bonnet (1) 2b - PVD Gold Faucet Bonnet (1) 3 - Ball Friction Washer (1) 4 - Nylon Ball Washer (1) 5a - Brass Lever (1) 5b - Stainless Steel Lever (1) 6a - Coupling Gasket (1) 6b - Perlick firm Coupling Gasket (1) 8 - Valve Seat (1) 9 - Shaft Nut (1)

Faucets

10 (1) 12 (1) 14 (7) 16 (5) 18 (3) 20 (5) 24 (4) 5 (1) 8 (1)

Faucets per side

18 Mirror (1) 20 Mirror (1) 24 Mirror (1) 30 Mirror (1)

Finish

Black vinyl (1) CHROME (1) CHROME (1) Chrome (1) GOLD (1) Gold (1) PVD BRASS (1) Stainless Steel Grid and PVD Brass Pan (1) Stainless Steel Grid and Pan (1) Stainless steel (1)

For Chiller

504-0004 (1)

Frame

Curved Back (1) Curved Back with sliding keg hook (1) Standard Straight Back (1)

Glass Rinser

Standard (No Rinser) (1) With Glass Rinser (1)

Handle

50” Squared Off Loop, with Comfort Sleeve (1) 50” Standard Loop (1) 50” Standard Loop w/ Plastic Comfort Sleeve (1) 50” Standard Loop w/ Plastic Comfort Sleeve and “U” Brace (1) 50” Standard Loop w/ “U” Brace (1) 52” Sq Loop, Flared Dbl Grips at 48”, 1 Crossmember HDHT (1) 52” Str Loop, Vert Grip at 52” (1) 52” Str Loop, Vert Grip at 52” For B4/B5 Frame (1) Flared Dbl Grip w/ “U” Brace, Grip Height 48” (1)

In Line Leak Indicator

Add In Line Leak Indicator (1) Add In Line Leak Indicator (1) Add In Line Leak Indicator (1) Not included (1) Not included (1) Not included (1)

John Guest Opening

1/2" x 1/2" (1) 1/4" x 1/4" (1) 3/16" x 3/16" (1) 3/8" x 1/2" (1) 3/8" x 3/8" (1) 5/16" x 5/16" (1)

John Guest Size

1/2" x 1/2" x 1/2" (1) 1/4" x 1/4" x 1/4" (1) 3/16" x 3/16" x 3/16" (1) 3/8" x 3/8" x 3/8" (1) 5/16" x 5/16" x 5/16" (1)

LT18 Parts

(10) 216D 5/16" Air Nipple (1) (11) FT-106 Check Valve Retainer (1) (12) 23 Check Valve (1) (13) FT-106ASY Check Valve Assembly (1) (14) 108 Body Seal (1) (2) LT-8NAGS Handle Assembly (1) (4) FT-113GS Ball Retainer (1) (5) 909B Ball (1) (6) FT-102 Body "O" Ring (3 required) (1) (7) FT-103 US Probe Seal (1) (8) FT-115GS Pressure Relief Valve Assembly (1) (9) 218 Hex Nut (1)

Length

100' roll (3) 3-1/2" (1) 42" x 17" (1) 48" x 17" (1) 500' roll (1) 6" (1) 60" x 17" (1) 8" (1) 80" x 17" (1) 93" x 17" (1) By the foot (2) Per foot (3)

Material

Chrome-plated Brass (2) Nickel Plated Brass (1) Stainless Steel (3)

Model number

KAR42 (1) KAR48 (1) KAR60 (1) KAR80 (1) KAR93 (1) KDR136 (1) KDR148 (1) KSR48 (1) KSR72 (1)

Nose Plate

C3 Extruded Aluminum 14” x 7.5” Solid Rear Mount (1) C6 Extruded Aluminum 18” x 9” Solid, Front Mount (1) C8 Extruded Aluminum 16” x 12” Solid, Front Mount (1) C9 Extruded Aluminum 20” x 12” Solid, Front Mount (1) Extruded Aluminum 14” x 7.5”, Recessed Heel (1) Extruded Aluminum 14” x 7.5”, Recessed Heel, C1 w/cutouts (1) Extruded Aluminum 18” x 7.5”, Recessed Heel (1) Extruded Aluminum 18” x 7.5”, Recessed Heel, C2 w/cutouts (1)

Number

5 (8) 7 (1)

Number of cylinders

2 cylinders (1) 4 cylinders (1) 6 cylinders (1)

Parts

(1) 104-1 1/3 HP Motor, 115V (1) (1) Handle Retaining Ring (1) (10a) US Probe Seal (1) (10b) 104-5C8P 8 ft. Pressure Hose Only (1) (10b) Euro Probe Seal (1) (10c) 104-5C12P 12 ft. Pressure Hose Only (1) (11) 4352T Threaded Cleaning Attachment (1) (11) Probe "O" Ring (1) (12) 104-7 Liquid Filled Pressure Gauge (1) (12) Ball (1) (13) 104-6 By-Pass Valve (1) (13) Ball Retainer (1) (14) 104-2E Pump to Motor Bracket (1) (15) 104-8 Handle (1) (17) 24R Rubber Washer (Each) (1) (18) 104-2G Spider (1) (19) 104-2F Half Coupling (1) (2) 104-1E Toggle Switch (1) (20) 104-2H Screw (1) (21) 104-2B Seal (1) (22) 104-2J Cover Casting (1) (23) 104-2D Carbon Bearings (1) (24) 104-2A1 Retaining Ring (1) (25) 104-2A2 Drive Shaft Only (1) (26a) 104-2A3 Plastic Gear (1) (26b) 104-2AP1 Plastic Drive Gear Assembly (1) (26c) 104-2AP2 Plastic Idle Gear Assembly (1) (27) 104-2A4 Key (1) (28) 104-2A5 Idle Shaft Only (1) (29a) 104-2AB1 Bronze Drive Gear Assembly (1) (29b) 104-2AB2 Bronze Idle Gear Assembly (1) (2a) Plastic Wing Handle (1) (2b) Metal Wing Handle (1) (3) 104-1B 115V Cord Only (1) (3) Snap Ring (1) (31) 104-2O "O" Ring (Newer Models) (1) (32) 104-2K Body Casting (1) (33) 104-2M Screw (Each) (1) (34) 104-4A Pyrex Glass (1) (35) 104-4B Gasket (Each) (1) (36) 104-4C Brass Screen (1) (37) 104-4D Casting Set (1) (4) 104-4ASSY Sight Glass Assembly (1) (4) Spring (1) (5) 104-3 Aluminum Base (1) (5) Hex Nut (1) (6) 104-3A Rubber Feet (Each) (1) (6) 5/16" Air Nipple (1) (7) Check Valve (1) (8) Body Seal (1) (8b) 104-5C8S 8 ft. Suction Hose Only (1) (9) 104-5B Suction Strainer Assembly (1) (9) Pressure Relief Valve Assembly (1) (N/A) 104-1E1 Switch Mounting Box (1) (N/A) 104-1E2 Switch Box Cover Plate (1) (N/A) 104-5B1 Suction Strainer Fitting Body (1) (N/A) 104-5B2 Suction Strainer Collar Nut (1) (N/A) 104-5B3 Suction Strainer Screen (1) (N/A) 252-S Double Male S/S Threaded Connector (1) Ball (1) Ball Retainer (1) Check Valve (1) Handle Pin (1) Probe O-ring (1) Probe Washer (1)

Pin Lock Disconnect

1/4" Hose Barb [Gas] (1) 1/4" Hose Barb [Liquid] (1) 1/4" Male Flare [Gas] (2) 1/4" Male Flare [Liquid] (2)

Products

4 (15)

Quantity

Bag of 100 (1) Each (2) Per dozen (1)

Rinser Disc

Plastic (1) Stainless Steel (1)

SFSSB-1 Parts

(1) SF2000-2 Stainless Steel Screw (1) (10) SF2000-15 Cone Flow Straightener (1) (11) SF2000-16 Stainless Steel Nozzle (1) (12) SF2000-17 Stainless Steel Dowel Pin (1) (13) 1013021 Coupling Gasket (1) (14) SF2000-18 Stainless Steel Stop Nut (1) (2) SF2000-3 Sliding Cap (1) (3) SF2000-4 Spring (1) (4) SF2000-5 Screw Cap “O” Ring (1) (6) SF2000-9 Upper Piston "O" Ring (1) (7) SF2000-12 Lower Piston "O" Ring (1) (8) SF2000-13 Nozzle "O" Ring (1) (9) SF2000-14 Stainless Steel Jet Disc (1)

Side Port

Pass Through (3) Pass Through (1) Pass Through (1) Pass Through (1) Plugged (1) Plugged (3) Plugged (1) Plugged (1)

Size

1/2" BARB X 3/8" MPT BRASS FITTING (1) 1/2" x Plug (1) 1/4" BARB X 1/4" MPT BRASS FITTING (1) 1/4" BARB X 3/8" MPT BRASS FITTING (1) 1/4" Barb x 1/4" Female Flare Nut (1) 1/4" Barb x 3/8" Female Flare Nut (1) 100' Roll (1) 2-7/8" x 1/2" x 6' (1) 3-5/8" x 1/2" x 6' (1) 3/8" BARB X 1/4" MPT BRASS FITTING (1) 3/8" BARB X 3/8" MPT BRASS FITTING (1) 3/8" Barb x 1/4" Female Flare Nut (1) 3/8" Barb x 3/8" Female Flare Nut (1) 3/8" x Plug (1) 4-1/2" x 1/2" x 6' (1) 5/16" BARB X 1/4" MPT BRASS FITTING (1) By the case (3) Single bottle (3)

Size (length x depth)

10" x 6" (1) 12" x 6" (1) 14" x 6" (1) 4" x 4.5" (1) 6" x 4" (1) 6" x 6" (1)

Size and material

1/2" Barb Nickel Plated Brass (1) 1/2" Barb Stainless Steel (1) 1/4" Barb Nickel Plated Brass (1) 1/4" Barb Stainless Steel (1) 3/8" Barb Nickel Plated Brass (1) 3/8" Barb Stainless Steel (1) 5/16" Barb Nickel Plated Brass (1) 5/16" Barb Stainless Steel (1) 7/16" Barb Nickel Plated Brass (1) 7/16" Barb Stainless Steel (1)

Speed Rail

SPR-22D - 22" Double (1) SPR-22S - 22" Single (1) SPR-32D - 32" Double (1) SPR-32S - 32" Single (1) SPR-42D - 42" Double (1) SPR-42S - 42" Single (1)

Stem x Barb

1/2" Stem x 1/2" Barb (1) 3/8" Stem x 1/4" Barb (1) 3/8" Stem x 3/8" Barb (1) 3/8" Stem x 5/16" Barb (1) 5/16" Stem x 3/16" Barb (1) 5/16" Stem x 5/16" Barb (1)

Taps

5 (1)

Taps (Holes)

1 (5) 10 (15) 12 (15) 15 (1) 2 (9) 3 (13) 4 (2) 5 (3) 6 (16) 6 (1) 7 (1) 8 (21) 8 (1)

Tower

Include Double Tower (1) Include Single Tower (1) No Tower - Clamp Only (1) include Triple Tower (1)

Tower Replacement Parts

(1) Black plastic faucet handle (1) (2b) 1-3/4" x 3/16" nippletower shank only (Stainless) (1) (3a) Chrome coupling nut (1) (3b) Brass coupling nut (1) (4a) Curved plastic tower flange (Chrome) (1) (4b) Curved plastic tower flange (Brass) (1) (5) Plastic spacer (1) (6) Tower lock nut (1) (7a) 2-1/2" Tower gasket (1) (7b) 3" Tower gasket (1) (7c) 4" Tower gasket (1) (8a) 2-1/2" Tower cap (1) (8b) 3" Tower cap (1)

Tunkline Product / Glycol Lines

10 Product / 4 Glycol (1) 12 Product / 4 Glycol (1) 14 Product / 4 Glycol (1) 16 Product / 4 Glycol (1) 2 Product / 2 Glycol (1) 20 Product / 4 Glycol (1) 4 Product / 2 Glycol (1) 5 Product / 2 Glycol (1) 6 Product / 2 Glycol (1) 8 Product / 2 Glycol (1)

Tunkline Product and Glycol Lines

10 Product / 4 Glycol (1) 10 Product / 4 Glycol (1) 12 Product / 4 Glycol (1) 12 Product / 4 Glycol (1) 14 Product / 4 Glycol (1) 16 Product / 4 Glycol (1) 16 Product / 4 Glycol (1) 2 Product / 2 Glycol (1) 2 Product / 2 Glycol (1) 20 Product / 4 Glycol (1) 24 Product / 4 Glycol (1) 4 Product / 2 Glycol (1) 4 Product / 2 Glycol (1) 5 Product / 2 Glycol (1) 5 Product / 2 Glycol (1) 6 Product / 2 Glycol (1) 6 Product / 2 Glycol (1) 8 Product / 2 Glycol (1) 8 Product / 2 Glycol (1)

Wheels (per pair)

D15 600 lb Capacity - 10” x 2-1/8” ProFlex Polypropylene Hub, Closed Cell Polyurethane Tread, Precision Bearings (1) D16 600 lb Capacity - 8” x 2-1/8” ProFlex Polypropylene Hub, Closed Cell Polyurethane Tread, Precision Bearings (1) D2 500 lb Capacity - 10” x 2.5” 1 pc Plastic Hub, Semi Pneumatic (1) D5 600 lb Capacity - 10” x 3.5” 2 pc. Steel Hub, 4 Ply Pneumatic, Precision Bearings (1) D6 600 lb Capacity - 10” x 3” Carefree®, 1 pc. Steel Hub, 5/8” Precision Bearings (1) D6SS 600 lb Capacity - 10” x 3” Carefree®, Polypropylene Hub, 5/8” Precision Bearings (1) D9 500 lb Capacity - 8” x 2.5” 2 pc Steel Hub, Pneumatic (1)

Brand

Armstrong (1) B&P Manufacturing (33) Beverage Air (3) Chill-Max (6) Cornelius (5) Draftec (2) Flojet (8) Hoshizaki (2) Krome Dispense (2) McDamtim (6) Micro Matic (23) National Chemicals (24) Perlick (17) TOF (12) Taprite (60) UBC Group (26) Vin Service (6)

Filter by Price

Variations

36000GS-Parts

425 Series

525 Series

630 Series

Accessories

Amount

Case of 10 (1) Each (1)

Ball Lock Disconnect

1/4" Barb [Gas] (1) 1/4" Barb [Liquid] (1) 3/8" Barb [Gas] (1) 3/8" Barb [Liquid] (1)

Barb size

1/2 x 1/2 x 1/2 (1) 1/2" (1) 1/4 x 1/4 x 1/4 (1) 1/4 x 1/4 x 3/8 (1) 1/4 x 3/8 x 3/8 (1) 1/4" (1) 3/8 x 3/8 x 3/8 (1) 3/8" (1) 5/16 x 5/16 x 5/16 (1) 5/16" (1)

Barb sizes

1/2" X 1/2" (1) 1/4" X 1/4" (1) 1/4" X 3/8" (1) 3/8" X 1/2" (1) 3/8" X 3/8" (1) 5/16" X 5/16" (1)

Brush Size

CH5000 Parts

Carbonation Tester Options

2701-BCT-01 (1) 2701-BCT-02 (1)

Clamp Size

10.0 mm (1) 10.5 mm (1) 11.3 mm (1) 12.3 mm (1) 13.3 mm (1) 14.0 mm (1) 14.5 mm (1) 15.7 mm) (1) 16.2 mm (1) 17.0 mm (1) 18.5 mm (1) 19.8 mm (1) 21.0 mm (1) 22.6 mm (1) 24.1 mm (1) 9.5 mm (1)

Cold plate products/size

Color

Cooling

AIR COOLED (1) AIR COOLED (2) Air Cooled (2) GLYCOL COOLED (1) GLYCOL COOLED (2) Make Glycol Ready (2)

Dimensions

10" x 15" Plate (1) 8" x 12" Plate (1) 8" x 14" Plate (1)

Drain

No drain hole (3) No drain hole (1) Standard drip tray (3) Standard drip tray (1)

Faucet Parts

Faucets

10 (1) 12 (1) 14 (7) 16 (5) 18 (3) 20 (5) 24 (4) 5 (1) 8 (1)

Faucets per side

18 Mirror (1) 20 Mirror (1) 24 Mirror (1) 30 Mirror (1)

Finish

Black vinyl (1) CHROME (1) CHROME (1) Chrome (1) GOLD (1) Gold (1) PVD BRASS (1) Stainless Steel Grid and PVD Brass Pan (1) Stainless Steel Grid and Pan (1) Stainless steel (1)

For Chiller

504-0004 (1)

Frame

Curved Back (1) Curved Back with sliding keg hook (1) Standard Straight Back (1)

Glass Rinser

Standard (No Rinser) (1) With Glass Rinser (1)

Handle

In Line Leak Indicator

Add In Line Leak Indicator (1) Add In Line Leak Indicator (1) Add In Line Leak Indicator (1) Not included (1) Not included (1) Not included (1)

John Guest Opening

1/2" x 1/2" (1) 1/4" x 1/4" (1) 3/16" x 3/16" (1) 3/8" x 1/2" (1) 3/8" x 3/8" (1) 5/16" x 5/16" (1)

John Guest Size

1/2" x 1/2" x 1/2" (1) 1/4" x 1/4" x 1/4" (1) 3/16" x 3/16" x 3/16" (1) 3/8" x 3/8" x 3/8" (1) 5/16" x 5/16" x 5/16" (1)

LT18 Parts

Length

100' roll (3) 3-1/2" (1) 42" x 17" (1) 48" x 17" (1) 500' roll (1) 6" (1) 60" x 17" (1) 8" (1) 80" x 17" (1) 93" x 17" (1) By the foot (2) Per foot (3)

Material

Chrome-plated Brass (2) Nickel Plated Brass (1) Stainless Steel (3)

Model number

KAR42 (1) KAR48 (1) KAR60 (1) KAR80 (1) KAR93 (1) KDR136 (1) KDR148 (1) KSR48 (1) KSR72 (1)

Nose Plate

Number

5 (8) 7 (1)

Number of cylinders

2 cylinders (1) 4 cylinders (1) 6 cylinders (1)

Parts

Pin Lock Disconnect

1/4" Hose Barb [Gas] (1) 1/4" Hose Barb [Liquid] (1) 1/4" Male Flare [Gas] (2) 1/4" Male Flare [Liquid] (2)

Products

4 (15)

Quantity

Bag of 100 (1) Each (2) Per dozen (1)

Rinser Disc

Plastic (1) Stainless Steel (1)

SFSSB-1 Parts

Side Port

Pass Through (3) Pass Through (1) Pass Through (1) Pass Through (1) Plugged (1) Plugged (3) Plugged (1) Plugged (1)

Size

Size (length x depth)

10" x 6" (1) 12" x 6" (1) 14" x 6" (1) 4" x 4.5" (1) 6" x 4" (1) 6" x 6" (1)

Size and material

Speed Rail

SPR-22D - 22" Double (1) SPR-22S - 22" Single (1) SPR-32D - 32" Double (1) SPR-32S - 32" Single (1) SPR-42D - 42" Double (1) SPR-42S - 42" Single (1)

Stem x Barb

1/2" Stem x 1/2" Barb (1) 3/8" Stem x 1/4" Barb (1) 3/8" Stem x 3/8" Barb (1) 3/8" Stem x 5/16" Barb (1) 5/16" Stem x 3/16" Barb (1) 5/16" Stem x 5/16" Barb (1)

Taps

5 (1)

Taps (Holes)

1 (5) 10 (15) 12 (15) 15 (1) 2 (9) 3 (13) 4 (2) 5 (3) 6 (16) 6 (1) 7 (1) 8 (21) 8 (1)

Tower

Include Double Tower (1) Include Single Tower (1) No Tower - Clamp Only (1) include Triple Tower (1)

Tower Replacement Parts

Tunkline Product / Glycol Lines

Tunkline Product and Glycol Lines

Wheels (per pair)

Brand

Sort by:

8 Tap Chrome Finished Terra Style "T" Glycol Tower With Decorative Flanges

$825.00

Name *

Phone *

Email *

Question *

12" X 7-1/4" S/S Drip Tray

$62.00

15-3/4" X 15-3/4" Drain Tray With Tower Mount Drip Pan (no Rinser)

$278.00

15-3/4" X 15-3/4" Drain Tray With Tower Mount Drip Pan w/ Rinser

$300.00

16" X 7-1/4" S/S Drip Tray

$70.00

20" X 7 1/4" S/S Drip Tray With Rinser

$243.00

20" X 7-1/4" S/S Drip Tray

$173.00

23-5/8" X 15-3/4" Drain Tray With Tower Mount Drip Pan (no Rinser)

$293.00

23-5/8" X 15-3/4" Drain Tray With Tower Mount Drip Pan w/ Rinser

$315.00

24" X 7 1/4" S/S Drip Tray With Rinser

$205.00

24" X 7-1/4" S/S Drip Tray

$155.00

31-1/2" X 15-3/4" Drain Tray With Tower Mount Drip Pan (no Rinser)

$345.00

31-1/2" X 15-3/4" Drain Tray With Tower Mount Drip Pan w/ Rinser

$368.00

36" X 7 1/4" S/S Drip Tray With Rinser

$220.00

36" X 7-1/4" S/S Drip Tray

$170.00

39-3/8" X 15-3/4" Drain Tray With Tower Mount Drip Pan (no Rinser)

$405.00

39-3/8" X 15-3/4" Drain Tray With Tower Mount Drip Pan w/ Rinser

$428.00

45" X 7 1/4" S/S Drip Tray With Rinser

$245.00

45" X 7-1/4" S/S Drip Tray

$195.00

48" X 7 1/4" S/S Drip Tray With Rinser

$255.00

48" X 7-1/4" S/S Drip Tray

$205.00

"T" Style Ceramic Tower

from $2,860.00

Pre order

Danfoss Digital Thermostat (standard For All UBC Models) - 115V

$139.94

Door Gasket for KegMaster

$65.00

Glass Rinser Assembly With Metal Arms

$79.95

Round Style Ceramic Tower - Silva

from $870.00

Pre order

Looking for something specific that you didn't find on our website? Questions for our team of draft beer and bar equipment gurus? Get in touch by phone at 800-821-0114 or write to us anytime through our contact page.

Main Menu

Home
Blog
Brands
Warranty Policy
Shipping Policy
Return Policy
Sitemap
Contact

Our Office

Wholesale Beer Parts
723 North Street
Rochester, NY 14605

Phone: 800-821-0114